200-amp service upgrades, breaker box replacements and sub-panel installations for Chicagoland homes — permitted, inspected and done right the first time by licensed electricians.
Your electrical panel is the heart of your home’s electrical system. Every outlet, light, appliance and charger depends on it — and most panels in Chicagoland homes were installed decades before EV chargers, heat pumps, hot tubs and home offices became normal. At Revive Electric, we’ve spent more than 15 years upgrading and replacing electrical panels across West Chicago and the surrounding suburbs, giving families the capacity they need and the protection they deserve.
As a family-owned, owner-operated company, we handle every step ourselves: load calculation, permits with your village, coordination with ComEd, installation, and the final inspection. You get a fixed written price, a clean install and a panel that’s ready for whatever you add next.
If your home still runs on 60- or 100-amp service, has a fuse box, or has a Federal Pacific, Zinsco or Sylvania panel, an upgrade isn’t just about convenience — it’s about safety. Warm breakers, frequent trips, flickering lights when the AC kicks on, or a panel with no room for new circuits are all signs your system is working past its limits. We’ll assess your panel, explain exactly what we find and recommend the right solution for your home and budget.
A panel upgrade touches every circuit in your home, so it has to be planned and executed with care. From the first load calculation to the final inspection sign-off, here’s what we handle for you.
Move from 60- or 100-amp service to a modern 200-amp panel with room to grow. Ideal for homes adding an EV charger, standby generator, hot tub, heat pump or a finished basement.
Replace outdated fuse boxes and worn-out breaker panels with new, code-compliant panels featuring AFCI and GFCI protection where required by current Illinois and local codes.
These panels are known for breakers that fail to trip under fault conditions. We remove them safely and install a new panel that protects your home the way it should.
Add a dedicated sub-panel for a garage, workshop, detached building, basement remodel or home addition — without overloading your main panel.
We pull the permit with your municipality, schedule the utility disconnect and reconnect with ComEd, and meet the inspector on site so the job is approved and documented.
Read what our neighbors in West Chicago, Wheaton, Glen Ellyn, Elgin and across DuPage and Kane County have to say, explain the work clearly and leave the space cleaner than we found it. Read what our neighbors in West Chicago, Wheaton, Glen Ellyn, Elgin and beyond have to say about working with our team.
Every panel upgrade follows the same proven process so you always know what’s happening, what it costs and when it will be finished — no surprises, no hidden fees.
We inspect your current panel, meter and service entrance, then run a load calculation based on your appliances and anything you plan to add. You receive a clear recommendation and a fixed written quote.
We submit the permit application to your village or city, order materials, and coordinate the power shutoff and reconnect with ComEd so the work happens on a single scheduled day whenever possible.
Our licensed electricians install the new panel, label every circuit, test the system and meet the inspector for final approval. We walk you through your new panel before we leave.
Whether you’re adding an EV charger, preparing for a standby generator or simply want a panel that isn’t a fire risk, Revive Electric will handle the entire upgrade — assessment, permit, installation and inspection — with the care your home deserves.
Not sure whether your home needs a panel upgrade, or what the process involves? These are the questions Chicagoland homeowners ask us most. If you don’t see yours, give us a call — we’re happy to help.
Common signs include breakers that trip often, a panel that feels warm, flickering or dimming lights when large appliances start, a fuse box instead of breakers, 60- or 100-amp service, or no open slots for new circuits. Homes with Federal Pacific, Zinsco or Sylvania panels should be evaluated regardless of symptoms. We’ll inspect your panel and tell you plainly whether an upgrade is needed.
The price depends on your current service size, whether the meter socket and service entrance cable also need replacing, panel location, permit fees in your municipality and how many circuits are involved. After a free on-site assessment, we provide a fixed written quote with no hidden fees.
Yes. Every municipality in the Chicagoland area requires a permit and inspection for a panel or service upgrade, and ComEd requires an approved inspection before restoring power. Revive Electric handles the permit, the utility scheduling and the inspection for you.
Most residential panel upgrades are completed in one day. Power is typically off for four to eight hours while the old panel is removed and the new one is installed and inspected. We schedule the ComEd disconnect and reconnect in advance so downtime is as short as possible.
Often, yes. A Level 2 EV charger or a whole-home standby generator adds significant load and usually requires a dedicated 40- to 60-amp circuit. If your panel is already near capacity, upgrading first prevents overloads and gives you room for future additions. We can assess both projects in a single visit.
